Rev 10 Onyx Heated Bed
- RostockMAX v3.2
- RostockMAX v3
The design is "floating" and not bolted to the machine enclosures. The bed clips are used to hold this in place between the insulator and borosilicate glass.
- 310mm Overall diameter
- 1mm thick
- 280mm Heated Area
- Max approximate temp of this bed is 90C varying depending on vendor.
- Designed for 12.5VDC to 13.5VDC operation
- Approximately 1.2 Ohms resistance @ room temperature (optimally this would be 1.1ohm but varies order to order due to trace thickness from our vendor)
- Thermistor location offset from the center of the bed for more average readings
- Pads for power LED and resistor to indicate bed power
Included in the package:
- PCB Heated Bed
- Mounting Hardware
- Injection Molded Bed Support/Insulator
- 100k Thermistor
- Resistor/LED for Power Indicator
THE ROSTOCK MAX v2 OR EARLIER MACHINE WILL REQUIRE MODIFICATION (no instruction or support for this modification, at your own risk).