Cart 0
NEMA 17 high torque 76 ounce inch stepper motor for 3d printers

NEMA 17 High Torque Long Can Stepper Motor

  • $1850
SeeMeCNC P/N: - UPC:

These NEMA 17 stepper motors are direct replacements for the Rostock MAX kits as well as the ORION.  They come with 750mm long wires with pre-installed locking connectors to directly plug into the RAMBo boards or a 4 pin non shrouded connector with .1" spacing, 5mm shafts that are 22mm long with a flat on the shaft for better holding of the timing pulleys.  76oz in. of torque and 300mm long wire leads with a 4 pin non locking connector already installed.

We Also Recommend